Detailed Product Description

The basic process is as follows:

    Blank mats35×22×2.8mmare stacked vertically by hand and automatically feed blank mats to following section.

    The blank mat is injected with a fixed amount of Pynamin Forte.

    The impregnated mats are automatically wrapped by laminated film.

    The laminated film is cut into sets, each one containing 3 or 15 pieces of mats.

    The detector function automatically stops the machine if a mat is wrapped without being injected, or it is not wrapped (selective).

Operation speed        About 480-630 mats/min/6 lines (variable)

Injection amount       About 30mg-300mg (variable)

Required size of mat   About 35×22×2.8mm±0.1mm

Packing film   OPP/PE, CPP/PE, OPP/AL/PE, OPP/AL/PE (235-240MM/W×500-1000M/L/roll)

Solution Tank     30 liters with agitation motor & heater (W/temperature controller)

Heater           Seal roll 1.5KW & solution tank 300 W

Cutting position & method   Straight cutting and perforation

Main drive motor    0.75KW & single phase (Frequency converter to step-less speed regulation)

Power consumption     About 2.6KW

Other devices    With individual circuit stop (injection stop mat feed stop), crosswise cutter timing differential adjuster, emergency

                        stop and counter

Machine weight and packing measurement   About 650KGS/net, 900KGS/gross and 4.5M³